|
iPod Premium Display Screen Shield (Single) for All Mini iPod & Gen 1 & 2 Nano
Description
These protective Display Screen Shields are made from Soft-PVC, are totally transparent and approx. 0.15mm thick. They stick to the iPod screen without any form of glue so there is no sticky residue when you remove them. This screen shield is pre-sized for your iPod screen.
The Display Screen Shield offers super-flat screen protection for the iPod user that wants protection, but doesn't want to see it!
This product is ideal for use with the exo3 Xskn, but can be used with any skin.
WLM scoured the globe for a product like this after receiving complaints about iShades not clinging to the iPod. Using these exclusive screen display protector creates a surface that actually grips the iShade securely. If you want, you can still use an iShade color for added protection or for a coloured screen effect. The screen remains crystal clear.
Sure, there are other thin screen protectors on the market, but they can cost as much as an exo3 skin itself.
Instructions:
Remove grease and dust from the screen using a fluff-free cloth with a drop of washing up liquid diluted in water. Cleansing wipes for spectacles can also be used.
Remove the thin PVC screen protector from the white backing paper. This side will be affixed later to the screen. Be careful not to bring the screen protector near clothing or dust, because static electricity could attract dust and fluff particles.
You can just apply it on the screen or for even better adhesion you can do the following:
In order to avoid bubbles, the screen protector should be moistened before applying to the screen. This is easy to do with a drop of clean water. Alternatively, you can breathe on the protector or the screen (with the aim of fogging it up) immediately before mounting. Protectors can be dampened before apply to the screen otherwise they may not stick.
Warning:
Use as little liquid as possible so that it does not run from the screen into the iPod.
Finally, apply the protector onto the screen, beginning from the bottom and slowly working towards the top. If bubbles appear, these should be smoothed out. If the bubbles cannot be moved, repeat the process using a little more liquid.
Should water appear on the edge of the screen protector, remove with a soft absorbent cloth. Check from time to time over the first hour, to see if the edges are lifting or if bubbles have appeared. Press the edges down or smooth out the bubbles if this should occur.
The application process can be repeated as often as you like.
This item is New, in retail packaging. This item is in stock and can ship today.
Features
"In principle, application is easy. It depends very much on what degree of perfection you wish to achieve. Ideally, once the protector is properly applied, you should not be able to see the protector even when looking directly at it"
In the past when I have had my ipod in my pocket, I have found that the ishade tended to move around a bit, so it became a matter of slipping it around back to where it should sit
Since applying the screen protector and then putting the ishade back on, it is very difficult for the ishade to move out of place. I have tried slipping it around like I used to do and it won't budge
This is great, you cannot notice it, it gives more protection and keeps the ishade where it is meant to be
System Requirements
N/A
Dimensions
Package Dimension: Length 4 12/16" x Width 2 15/16"
Product Specs
Clear
Includes
Only one single iPod Shield included.
**For 3 packs please order part number SCRSHIELD-MINI
Notes
Apply the screen protector at one's own risk. No liability can be accepted as a result of accidental damage caused while mounting the protector onto the iPod.
Installing is easy
Clean your LCD screen with a screen cleaner & cloth found Here
Compatibility
This is for the All Mini, original nano & the 2nd Generation nano2 only
Warranty
WLM will credit any unopened and unused item if requested within 14 days of customer receipt. Manufacturer's warranty length is 30 day. WLM will handle all other customer warranty issues. Click here for details.
*Click on picture for a better view
092507, 061908, 110708
| 
Toll Free: 800-588-5290
